PEL410 Engine Lathe
Features
- Bed made of high tensile strength cast iron for rigidity
- Induction hardened, precision ground V guideway
- Spindle is supported by precision taper roller bearings
- Hardened, precision ground gears in headstock
- Equipped with thermal relay for overload and emergency stop
- Auto feed and threading are interlocked
- Dual speed motor provides wider range of spindle speed
- One-piece cast iron base
- Safety device for feed rod protection
- Gearbox allows various threads and feeds without changing gears
- One shot lubricator
- Non-operation on end cover opening for safety
Specifications
| Swing over bed | 410mm (16") |
| Swing over cross slide | 250mm (10") |
| Swing over gap | 580mm (23") |
| Distance between centers | 1000mm (40") |
| Spindle bore | 52mm (2-1/4") |
| Taper of spindle bore | MT#6 |
| Spindle nose | D1-6 |
| Range of spindle speed | 45-1800rpm (16 steps) |
| Range of longitudinal feed | 0.05-1.7mm/rev (0.002-0.067"/rev) |
| Range of cross feed | 0.025-0.85mm/rev (0.001-0.0335"/rev) |
| Range of metric threads | 0.2-14mm |
| Range of imperial threads | 2-72TPI |
| Range of module threads | 0.3-3.5mm |
| Range of diametrical threads | 8-44DP |
| Travel of cross slide | 210mm (8-1/4") |
| Travel of top slide | 102mm (4") |
| Travel of tailstock quill | 120mm (4-3/4") |
| Taper of tailstock quill | MT#4 |
| Motor horse power | 4.5HP (3.3KW) |
| NW/GW | 1550/1800kg |
| Packing size(LxWxH) | 2060x1000x1640mm |
Standard accessories
- 200mm (8") 3 jaw chuck
- 320mm (12") 4 jaw chuck
- Faceplate
- Steady rest
- Follow rest
- Reduction sleeve (MT#6/4)
- Dead center (MT#4)
- Chasing dial
- Splash guard
- Chip tray
- Change gears
- Toolbox with tools
- Halogen work light
- Coolant system
- Foot brake
Optional accessories
- Quick change tool post
- Taper turning attachment
- Chuck guard
- Leadscrew cover