PBL330 Bench Lathe
Features
- Bed made of high tensile strength cast iron for rigidity
- Induction hardened, precision ground V guideway
- Spindle is supported by precision taper roller bearings
- Hardened, precision ground gears in headstock
- Equipped with thermal relay for overload and emergency stop
- Auto feed and threading are interlocked
Specifications
| Swing over bed | 330mm (13") |
| Swing over cross slide | 198mm (8") |
| Swing over gap | 476mm (18-3/4") |
| Distance between centers | 1000mm (40") |
| Taper of spindle bore | MT#5 |
| Spindle bore | 38mm (1-1/2") |
| Spindle nose | D1-4 |
| Range of spindle speed | 70-2000rpm (8 steps) |
| Range of longitudinal feed | 0.082-2.71mm/rev (0.0032-0.1067"/rev) |
| Range of cross feed | 0.022-0.933mm/rev (0.0009-0.0367"/rev) |
| Range of metric threads | 0.4-7mm |
| Range of imperial threads | 4-56TPI (40 kinds) |
| Travel of cross slide | 160mm (6-1/2") |
| Travel of top slide | 68mm (2-3/5") |
| Travel of tailstock quill | 95mm (3-3/5") |
| Taper of tailstock quill | MT#3 |
| Motor | 1.5KW (2HP) |
| Net weight | 490kg |
| Packing size(LxWxH) | 1930x760x1500mm |
Standard accessories
- 160mm (6") 3 jaw chuck
- 200mm (8") 4 jaw chuck
- Face plate
- Steady rest
- Follow rest
- Reduction sleeve (MT#5/3)
- Dead center (MT#3)
- Chasing dial
- Splash guard
- Chip tray
- Halogen work light
- Coolant system
- Foot brake
- Change gears
- Toolbox with tools
- Foot stand
Optional accessories
- Quick change tool post
- Chuck guard
- Leadscrew cover