PBL300A Bench Lathe
Features
- Bed made of high tensile strength cast iron for rigidity
- Induction hardened, precision ground V guideway
- Spindle is supported by precision taper roller bearings
- Hardened, precision ground gears in headstock
- Equipped with thermal relay for overload and emergency stop
- Auto feed and threading are interlocked
- Protection safety device for feed rod
Specifications
| Swing over bed | 300mm (12") |
| Swing over cross slide | 178mm (7") |
| Swing over gap | 430mm (17") |
| Distance between centers | 914mm (36") |
| Spindle bore | 38mm (1-1/2") |
| Taper of spindle bore | MT#5 |
| Spindle nose | D1-4 |
| Range of spindle speed | 60-1500 rpm (9 steps) |
| Range of longitudinal feed | 0.052-1.391mm/rev (0.002-0.0548"/rev) |
| Range of cross feed | 0.014-0.38mm/rev (0.0007-0.0187"/rev) |
| Range of metric threads | 0.4-7mm |
| Range of imperial threads | 4-56TPI |
| Longitudinal travel of carriage | 800mm (31-1/2") |
| Travel of cross slide | 175mm (6-7/8") |
| Travel of top slide | 95mm (3-3/4") |
| Travel of tailstock quill | 100mm (4") |
| Taper of tailstock quill | MT#3 |
| Motor | 1.5HP (1.1KW) |
| Net weight | 420kg |
| Packing size(LxWxH) | 1680x760x1400mm |
Standard accessories
- 160mm (6") 3 jaw chuck
- 200mm (8") 4 jaw chuck
- Faceplate
- Steady rest
- Follow rest
- Reduction sleeve (MT#5/3)
- Dead center (MT#3)
- Chasing dial
- Splash guard
- Chip tray
- Change gears
- Toolbox with tools
- Foot stand
Optional accessories
- Halogen work light
- Coolant system
- Quick change tool post
- Chuck guard
- Leadscrew cover